Description

Argon Flowmeter MIG 0-25 LPM

Argon flowmeters are used to accurately regulate the gas flow for mig welding. Suitable for all tig welders including draper, sealey, sip, telwin, kemppi, esab, migatronic, saf, oerlikon, clarke, cebora etc.

There are two flowmeters we supply. One is 0-14 litres per minute. The other is 0-25/30 litres per minute. 0-14 litres per minute is for use on TIG welding machines. 0-25/30 litres per minute is for use on MIG welding machines. The flowmeter is used to accurately adjust the gas flowrate which can be used on all welding gases. The gas pressure is set independently by the gas regulator. Also by using a flowmeter the chances of an accurate flow reading for any standard regulator increases by a large amount. Without a flowmeter the flow of gauge reading is unlikely to be very accurate.

0-25 Litres per minute (LPM)

This 0-25 litres per minute flowmeter fits between the regulator and gas hose. Furthermore it has a 3/8 BSP fitting which means it will fit all standard regulators. By using this item you will also save on wasted welding gas. Fine tuning the flow rate does this.

If you already have a two gauge regulator then you don’t have to worry about buying a new one gauge reg to fit this flowmeter to. It can still simply screw on to the outlet. Furthermore once attached and set you can adjust the outlet flow through turning the needle valve knob at the base of the flow tube.

Designed to be fitted to the outlet of an argon or CO2 regulator to provide greater control of the flow of your shielding gas through the gas line.

Flowmeters are designed for use with shielding gases used in MIG and TIG welding applications. Furthermore the accuracy of the gas flow control is greatly increased by use of a flowmeter fitted to the outlet of an argon-mix or CO2 regulator. Also it has the added benefit of giving a visual indication of when gas is actually flowing.

https://www.wecs-ltd.co.uk/product-category/cebora/cebora-autostar-160/