MPM 15/400 SS-K CC/CV – 24.8 HP KUBOTA D1105-E

£9,500.00 ex. Vat

Genset Welder Generators

SKU: MPM 16/400 SS-P CC/CV – 27.2 HP PERKINS 404-22G

Description

MPM 15/400 SS-K CC/CV – 24.8 HP KUBOTA D1105-E
Founded in 1974, GenSet SpA is one of the largest manufacturers of engine driven welder-generators in the world.
The production facilities are located near Pavia, Italy and cover an area of more than 35,000 square metres.
Research and development are the core elements of design excellence and GenSet constructs all the components required for the manufacture of its machines – thereby completing the entire production cycle in-house.
Quality System Certification standards are implemented throughout GenSet’s activities from design to production and each model is thoroughly tested before delivery and comes with a two year warranty as standard.
All GenSet’s products are Class H, IP 23, insulated and tested at 40°C ambient temperature at an altitude of 1000 metres.
From the workshop to the worksite Genset provides the power to weld in all environments.
In the factory at Villanova d’Ardenghi the company also designs and makes the asynchronous alternators that are installed both on the engine driven welders and on the generating sets.The coating division is one of the most advanced and permits the application of coatings with special systems aimed at providing a lasting finish. The bodywork and the chassis are made with automated machines, which automatically carry out any kind of process with great accuracy.
The company has ISO 9001 / UNI EN ISO 9001:2008 Quality System Certification and implements its standards in all its activities, from design to production, from purchases to sales. Each model is tested until it is fully ready to run when it is delivered.
The company’s international success is also due to the technical assistance that is readily available in every corner of the world. GenSet, through its sales network, is present in 1,200 sales outlets in Italy and in over 60 countries worldwide.
MPM 15/400 SS-K CC/CV – 24.8 HP KUBOTA D1105-E
FEATURES
Welding processes: SMAW (stick) / TIG
DAS, auto engine protection shutdown system with warning

lights in the event of:
– battery charger failure

– low fuel level
– low oil pressure

– high coolant temperature
Automatic idle device when no load is connected
Fuel level gauge
12V built-in battery with electric start
Hourmeter
Voltmeter
Remote control socket
Earth Leakage Circuit Breaker
1 x 32A, 400V – 50Hz three-phase EEC socket

1 x 32A, 230V – 50Hz single-phase EEC socket protected by
circuit breaker
1 x 32A, 110V – 50Hz single-phase EEC socket protected by

circuit breaker
Low-High amps switch for a more accurate arc control selection
30A – 200A / 30A – 400A
AUTO / IDLE switch
Arc Force Control with changeover switch basic / cellulosic

welding rods
Central lifting eye
Fork-lift pockets

CC/CV control for MIG welding
3000 RPM Kubota engine

https://www.wecs-ltd.co.uk/product-category/genset-welder-generators/

http://www.genset.it/eng/generators-genset/MPM-15-400-SS-K-generators-Welders-33.asp?pr1_cod=33&f_tipologia=Welders

 

 

 

 

 

 

Additional information

Weight400 kg

Reviews

There are no reviews yet.

Be the first to review “MPM 15/400 SS-K CC/CV – 24.8 HP KUBOTA D1105-E”