GYS Regulator For Disposable Gas Bottles

£29.67 ex. Vat

In stock

Description

GYS Disposable Gas regulator

GYS Regulator For Disposable Gas Bottles 041639 containing Pure Argon or Mixed Gases, for use with all MIG welders on mild steel or Pure Argon for aluminium.
The regulator comes complete with a short 5.0mm hose 2 x 0 crimps and a 4.0mm tube adaptor which offer the connection to your machines 4.0mm gas tube.

The GYS Disposable Regulator For Disposable Gas Bottles. Disposable Gas regulator with inlet and outlet gauges. This regulator can fit 5mm and 6mm hose.

This disposable gas regulator does not include a flow or pressure display. If you require a disposable gas regulator including you will need the weldgas regulator we supply. https://www.wecs-ltd.co.uk/product/gas-regulator-for-disposable-gas-bottles-3/

 

Did you know?

The choice of the protective gas and adjusting the gas flow are extremely important for the welding quality. Too low gas flow rate will not displace the surrounding air (air ionization). Too high gas flow rate will generate unwanted turbulences.

Conventional gas consumption
The horizontal corner position of the area to be welded blocks the gas that gradually escapes from each side of the part.

+ 30% more gas consumption In open or flat corner position, the gas escapes on all sides and is therefore less localized in the area to be welded. It is therefore necessary to increase the flow rate.

Cebora Torches

The cebora pocket turbo 130 was one of the most popular machines in the uk. It was used for DIY welding and automotive industry and many are still in use today. The cebora Autostar 160 and Autostar 180 were the other two most popular machine for automotive and sheet metal workers.   Welding equipment and cutting services have manufactured replacement parts for the Cebora Pocket Turbo 130 machines such as mig welding torches.

We have manufactured New Mig Torches for the Autostar 160 and the Autostar 180 machines. The autostar 160 and 180 modified torches use the MB15 consumables. Also the shroud is push on 53mm long 12mm long bore and the tips are 6mm thread, 25mm long. The pocket turbo 130 alternative torch uses MB14 consumables. However the shroud is screw on 38mm long 8mm bore and the tips are 5mm thread, 18mm long.

The gas nozzles, liners, contact tips, mig torch necks, carry handles, main contactors, fans, printed circuit board repair service, wire reel holders, rectifiers banks, the turbo 130 printed circuit board, clapper arm assembly and drive motor / gearbox are all no longer available.

 

Additional information

Weight0.3 kg

Reviews

There are no reviews yet.

Be the first to review “GYS Regulator For Disposable Gas Bottles”