Fantail Nozzle 200mm With Magnet FN9200

Description

The Electac portable MT welding fume & dust units are rugged & efficient with a well proven design that gives a long & trouble free working life.
Many companies throughout the World use both the double motor MT900ni & the single motor MT800ni finding that they are inexpensive to buy & economic to  operate.
Both units are used when portability & flexibility are required either with a capture nozzle held by a magnet or with a MIG extractor torch taking the fumes directly from the weld area.
A built-in spark trap & main disposable filter cartridge give 99.99% efficiency for all particulate.
Bypass airflow motors use separate cooling fans to ensure long life & a prominent filter full light indicates when a new filter cartridge is required.
Being fully serviceable, with spares readily available, is perhaps why they are probably the most used unit of it’s type in the U.K.
Fantail Nozzle 200mm With Magnet FN9200
FEATURES – ELECTAC MT800ni & MT900ni portable welding or dust filters
Extracts fume & dust at source & expels cleaned air to work area
Built-in spark arrestor
Choice of filters, standard or high efficiency
Fantail capture nozzle with magnet to hold in place, MIG torch attachment or use with Extractor MIG torch
Bye pass motors – cooling air is separate from suction from fume source
Built-in filter full indictor – senses pressure in front & behind the main filter cartridge
Carry around, portable machines – needs only a power point
115 or 230/240 volt 50 or 60 hz available
Fantail Nozzle 200mm With Magnet FN9200

http://www.electac.com/