Jasic Cut 100 Plasma Torch The Jasic Pro Plasma Cut 100 is professional high-end cutting inverter equipped with the latest IGBT technology. This technologically advanced plasma inverter is extremely user-friendly and offers reliable cutting performance. The machine provides variable cutting control that allows the operator to produce precise smooth cuts. The P150LT plasma torch supplied has the ‘euro style’ power/gas connection, pilot cable and switch pins connections. All Jasic plasma cutting systems and torches supplied incorporate a safety circuit to prevent operator injury when changing consumables etc. This is a simple ring circuit that breaks the electrical torch switching as soon as the retaining cap is removed preventing machine operation. Without such a protection circuit as previously mentioned the open circuit voltage could be as high as 350V DC at the torch head. The torch head encompasses a full set of consumables as shown right, these consumables are made up of a cooling tube, torch electrode, swirl ring for gas distribution, cutting tip, retaining cap and if required a stand off device to ensure the same distance between tip and material being cut. Fitting the P150LT plasma torch On the Jasic Cut 100 plasma machine, the below torch fitting instructions will need to be observed. Locate plasma torch plug into euro connector socket as shown in image (Fig 1) below While using the key provided (Fig 6) Push and hold in button in (Fig 2) whilst at the same time rotate nut on torch clockwise until fully connected and tight as shown in Fig 3 Fig 4 shows the torch screwed in correctly Fig 5 shows the torch not fully connected preset

Showing the single result